DIN 34crnimo6 tšepe e chitja bareng 1.6582 tšepe bareng
Likaroloana
34CrNiMo6 Steel ke tšepe ea bohlokoa ea alloy engineering joalo ka BS EN 10083-3:2006.34CrNiMo6 tšepe e na le matla a phahameng, e thata e phahameng le bokhoni bo botle ba ho thatafala.
34CrNiMo6 e sebelisoa liindastering tse kang lifofane, likoloi, likoloi le tšireletso ea naha.34CrNiMo6 e ka fumana kalafo ea mocheso joalo ka ho tloaeleha, ho futhumatsa le ho tima.E sebelisoa ho etsa liketane, likurufu, likere, matsoho, lirolara le likarolo tse ling tse fapaneng tsa mochini.
Tlhaloso
| Boholo | Ratoa | Bophahamo ba 6-1200 mm |
| Plate/Flat/Block | Botenya | |
| 6mm-500mm | ||
| Bophara | ||
| 20mm-1000mm | ||
| Tshebetso | EAF+LF+VD+Forged+Heat treatment(boikhethelo) | |
| Phekolo ea mocheso | Normalized ;Anealed ;E timiloe;Halefile | |
| Boemo ba bokahodimo | Batsho;E peeled;E bentšitsoeng;E entsoe ka mochini;Sila;E retelehile;Milled | |
| Boemo ba thomello | E entsoeng;Ho chesa;Mohatsela o hoheloa | |
| Teko | Matla a tenyetsehang, matla a tlhahiso, bolelele, sebaka sa phokotso, boleng ba tšusumetso, boima, boholo ba lijo-thollo, tlhahlobo ea ultrasonic, tlhahlobo ea US, tlhahlobo ea matla a khoheli, jj. | |
| Nako ea thomello | Matsatsi a 30-45 | |
| Kopo | 34CrNiMo6 e sebelisetsoa axle ea mochini o boima, lehare la turbine shaft, likarolo tse ngata tsa phetisetso, li-fasteners, crank shafts, likere, hammoho le likarolo tse jereng haholo bakeng sa kaho ea enjine joalo-joalo. | |
Sebopeho sa lik'hemik'hale (%)
| Carbon C | 0.3~0.38 |
| Silicon Si | 0.4 |
| Manganese Mn | 0.5~0.8 |
| Sebabole S | ≤ 0.035 |
| Phosphorus P | ≤ 0.025 |
| Chromium Cr | 1.3 ~ 1.7 |
| Nickel Na | 1.3 ~ 1.7 |
| Molybdenum Mo | 0.15-0.3 |
Thepa ea Mechini
| Matla a thata σ b (MPa) | 850-1400 |
| Matla a tlhahiso σ s (MPa) | ≥690~1000 |
| Elongation δ (%) | ≥9~15% |
| Ho thatafala | 239~259 HB |
| Equal different standard | |
| Kereiti | Standard |
| 34CrNiMo6 (1.6582) | EN 10083-3 |
| 4337 | ASTM A29 |
Boemo ba thomello
Sebaka se chesang sa forged bar, hangata boemo ba ho beleha bo chesa haholo, bo annealed/QT rough turn/Bokaholimo bo botšo.
Hot rolled bar, hangata boemo ba pelehi bo chesa, bo annealed/QT, Black surface.
Mamello
| Diameter(mm) | Mamello | ||
| Thepa e entsoeng ka tšepe e pota-potileng | 80-600 | Sebaka se Setšo: 0~+5 | E entsoe ka thata kapa e Fetiloe: 0~+3 |
| 650-1200 | Sebaka se Setšo: 0 ~ +15 | E entsoe ka thata kapa e Fetiloe: 0~+3 | |
| Hot Rolled Steel Round Bar | 16-310 | Sebaka se Setšo: 0~+1 | E entsoe: H11 |
| Cold Drawn Steel Round Bar | 6-100 | Sebaka se Setšo:H11 | E entsoe: H11 |
Sephutheloana
1.Ka mekotla, boima bo bong le bo bong bo ka tlase ho lithane tse 3, bakeng sa kantle ho tse nyane
bophara ba bar e chitja, sephutheloana se seng le se seng se nang le likhoele tsa tšepe tse 4 - 8.
Setshelo sa maoto a 2.20 se na le boholo, bolelele bo ka tlase ho 6000mm
Setshelo sa maoto a 3.40 se na le boholo, bolelele bo ka tlase ho 12000mm
4.Ka sekepe se seholo, Tefiso ea thepa e tlase ka thepa e ngata, ebile e kholo
saese e boima e ke ke ea laeloa ka har'a linkho tse tsamaisoang ka thepa e ngata
Setifikeiti sa Boleng: E fanoe ka Senyesemane, ho kenyelletsa mantsoe a tloaelehileng, ts'ebetso ea tlhahiso, thepa ea mochini (matla a tlhahiso, matla a ho tsitsa, bolelele le boima), tekanyo e entsoeng, sephetho sa tlhahlobo ea UT, boholo ba lijo-thollo, mekhoa ea kalafo ea mocheso le mohlala oa e bonts'itsoeng Setifikeiting sa Boleng.
Ho tšoaea: Nomoro ea mocheso e tla hatisoa ka setempe se batang 'me kereiti ea tšepe, bophara (mm), bolelele (mm), 'me moetsi oa LOGO le boima (kg) bo pentiloe.
Netefaletso ea boleng
1. E thata ho ea ka Litlhoko
2. Mohlala: Mohlala oa fumaneha.
3. Liteko: Teko ea ho fafatsa letsoai / Teko ea Tensile / Eddy hajoale / Teko ea sebopeho sa lik'hemik'hale ho latela kopo ea bareki
4. Setifikeiti: IATF16949, ISO9001, SGS joalo-joalo.
5. EN 10204 3.1 Setifikeiti
